Haivision / Aviwest (3)
yes this is very well possible. The Starlink Internet network allows you to get access to the internet virtually anywhere. The bandwidth you will be getting depends on your location and Subscription. But both the Aviwest PROxxx units we have for rental as the Intinor systems work very well together with Starlink. In general we use Starlink in conjunction with 4G / 5G to be redundant over multiple networks. The nice thing of using the Starlink is that this is a flat-rate subscription and depending on your provider 4G/5G might not be. this way you save money on data by offloading traffic to starlink. YourSide was one of the first to test with starlink for broadcast applications and thus has a lot of hands on experience with using this sort of links. In 2021 we already wrote about this on our website.
Wel first of al thanks for renting with us :-), then regarding the Ports on your firewall. To make things easy we created a little list of ports needed to make the stream-hub work with the Wireless 4G/5G transmitters coming in and sending video. Please find the list below:
Stream Hub Ports | ||||||||||
Type | Inbound | OutBound | ||||||||
TCP | 7900 | 7900 | ||||||||
UDP | 7900-7910 | 7900-7910 | ||||||||
TCP | 8884 | |||||||||
TCP | 9000-9100 | |||||||||
UDP | 9000-9100 | |||||||||
UDP | 20400-20432 | |||||||||
When a Databridge Connection is needed on the ProXXX (internet) then its advised to open all ports outbound | ||||||||||
so that the client on the other side can access the internet. |
If you also want to connect to SRT listeners the ports related to those listeners need to be opened outbound next to the once mentioned up here. If you are the listener for these SRT connections those ports need to be opened inbound for those connections.
If you like some assistance with this to setup feel free to get in contact we are happy to help.
Intinor (5)
Yes – A lot of the software options are available to be rented what is important in this the compatibility with your hardware. With this we mean that you need to have sufficient resources like CPU and memory but also sufficient IO for SDI in and or output.
Please note that for some licenses it might be needed to reboot the system after activating / deactivating the licenses. And some might even require the system to be reset to factory defaults.
To get accurate pricing and to check if a software option can be rented for your system get in touch.
Intinor can indeed be used to stream signals globaly using SRT / BiFrost or RIST. Yourside usually prefers to use SRT (YourSide is a SRT Alliance Partner) to do the distribution. To be able to provide global coverage we have partnered with GLOBALM as the distribution network making sure that bandwidth across the world is available for your stream making sure your contribution is streamed flawlessly. To see if we can provide an relayable alternative to your current (satellite or Fiber) network feel free to get in contact.
yes this is very well possible. The Starlink Internet network allows you to get access to the internet virtually anywhere. The bandwidth you will be getting depends on your location and Subscription. But both the Aviwest PROxxx units we have for rental as the Intinor systems work very well together with Starlink. In general we use Starlink in conjunction with 4G / 5G to be redundant over multiple networks. The nice thing of using the Starlink is that this is a flat-rate subscription and depending on your provider 4G/5G might not be. this way you save money on data by offloading traffic to starlink. YourSide was one of the first to test with starlink for broadcast applications and thus has a lot of hands on experience with using this sort of links. In 2021 we already wrote about this on our website.
Yes, Intinor can work with SRT gateways of any sorts. For suport anddetails please cotact YourSide Support
Yes – or the intercom module Intinor Direct products support AES67 audio with Dante compatibility. This means that when Linking Dante devices to your Intercom setup you need to put the Dante device you want to attach in to AES67 compatibility mode. Don’t forget to also set the Multicast range correctly and to create a AES67 audio group with the correct audio channels. after doing this you can use Dante controller to route to the Intinor and Route from the Intinor. Please not that the AES67 option for Intinor is a software license. This license is also available as a rental. If further assistance is needed / required please feel free to contact us.
RTS Intercom (4)
Yes – We do provide fully managed intercom servers for events and concerts. We can provide this on your own equipment or come in and fully take care of everything. In this last case you just tell us what is needed and we will make sure its there and that it works. This way you do not have to worry about stagehands not hearing the show-caller or other communications issues during the event. we make sure everybody is in communication with those important to there job during the event or concert. To learn more or to discuss your project just give us a call or an email and we are happy to look at your requirements.
Yes RTS ODIN / OMNEO does support both DANTE and AES67. Dante it supports by default. you can route streams from and to the intercom via Dante controller. To enable AES67 you need to enable the port from IPedit by ticking the box for “ST-2110 Enable”. After doing so and submitting the config to the Device you will be able to configure the port for AES67 compatibility from Dante controller to set the Multicast IP range. Also the AES67 multicast streamgroups then need to be made in Dante Controller. If you like assistance with this feel free to contact us.
yes you can request a quote for the outdoor Housing via our contact page. The outdoor housing can be delivered with or without the AP-1800. It will always include the Magic Clamp and the antenna’s and POE option.
When roaming the most common issues are described below. Please not that also having difference in versions of firmware between access points can cause issues with roaming. Please find the details on the states that the Roaming can be in below. This Table has been taken from the RTS TR-1800 Manual. Of issues still exist please contact us.
SRT General (2)
Intinor can indeed be used to stream signals globaly using SRT / BiFrost or RIST. Yourside usually prefers to use SRT (YourSide is a SRT Alliance Partner) to do the distribution. To be able to provide global coverage we have partnered with GLOBALM as the distribution network making sure that bandwidth across the world is available for your stream making sure your contribution is streamed flawlessly. To see if we can provide an relayable alternative to your current (satellite or Fiber) network feel free to get in contact.
yes this is very well possible. The Starlink Internet network allows you to get access to the internet virtually anywhere. The bandwidth you will be getting depends on your location and Subscription. But both the Aviwest PROxxx units we have for rental as the Intinor systems work very well together with Starlink. In general we use Starlink in conjunction with 4G / 5G to be redundant over multiple networks. The nice thing of using the Starlink is that this is a flat-rate subscription and depending on your provider 4G/5G might not be. this way you save money on data by offloading traffic to starlink. YourSide was one of the first to test with starlink for broadcast applications and thus has a lot of hands on experience with using this sort of links. In 2021 we already wrote about this on our website.