FAQs

Yes – or the intercom module Intinor Direct products support AES67 audio with Dante compatibility. This means that when Linking Dante devices to your Intercom setup you need to put the Dante device you want to attach in to AES67 compatibility mode. Don’t forget to also set the Multicast range correctly and to create a AES67 audio group with the correct audio channels. after doing this you can use Dante controller to route to the Intinor and Route from the Intinor. Please not that the AES67 option for Intinor is a software license. This license is also available as a rental. If further assistance is needed / required please feel free to contact us.

Yes RTS ODIN / OMNEO does support both DANTE and AES67. Dante it supports by default. you can route streams from and to the intercom via Dante controller.  To enable AES67 you need to enable the port from IPedit by ticking the box for “ST-2110 Enable”. After doing so and submitting the config to the Device you will be able to configure the port for AES67 compatibility from Dante controller to set the Multicast IP range. Also the AES67 multicast streamgroups then need to be made in Dante Controller. If you like assistance with this feel free to contact us.